If you dont know what your LNB is, try a setting and compare the frequency you scan in to the known frequency of the satellite you are scanning.ĭiSEqC Switching: DiSEqC switches are used to switch between two or more satellites LNBs. Others have two LNBs side by side that switch from one to the other by using the 22KHz Tone. Input Frequency Low: GHz High: GHz LO Frequency Low:9750MHz High:10600MHz Ku- for band Dual polarization and single output LO frequency switch able through 022KHz Polarity switch able through 1318V The LNB setting for this LNB is For a C band LNB choice There are two band C band LNBs as well. ![]() You can use a Universal LNB for high band only by setting for the LNB Freq and 22K ON. When a setting of has be set the 22KHz tone setting, which is set to Auto and the STB does this for you. Universal LNBs switch between the two parts by turning the 22KHz tone ON for the high part. ![]() One part is for the lower band and the other for the high band. The Ku band LNBs on the left have L O of Use the setting. This is the common C band LNB that uses setting The W S international has no Low listed is common and not always shown.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |